44000 lbs Heavy Duty Winch Snatch Block for 4x4 Offroad Recovery

Description:

Industrial Forged Carbon Steel Built to Hold Its Rating: This snatch block is produced from high-strength forged carbon steel rather than cast iron, then stamped and drop forged so the grain structure stays continuous through the load-bearing body instead of being interrupted at the corners. Finishing is applied part by part rather than as one generic coat. The sheave is color zinc plated, so the running surface is protected by an electrically bonded zinc layer that holds up against rust and keeps the groove smooth, letting synthetic rope and steel cable glide without flattening or fraying. The side plates are powder coated instead, giving them a thicker, denser film that resists chipping, road salt, mud and UV exposure under repeated rigging and handling. The sheave turns on sealed bearings, and the ring hole is machined to a 1.74 inch diameter for a clean shackle fit. Each unit keeps its rated geometry after repeated use, which is what separates a forged recovery pulley from a consumer-grade casting.

20 Ton Working Load and 40 Ton Break Strength: Rated at a 20 ton (44,000 lbs) working load limit with a 40 ton (88,000 lbs) maximum breaking strength, this winch pulley block is sized for recovery jobs that stall ordinary 8 ton and 10 ton snatch blocks. A 2:1 mechanical advantage doubles the effective pulling power of the winch: a 12,000 lbs winch can move loads that would otherwise require a far larger unit, while motor, battery and line strain are reduced at the same time.

One Block for Off-Road, Trailer, Farm and Workshop Duty: The application range is deliberately wide: off-road winch recovery for 4x4 trucks, SUVs, ATVs and UTVs; towing and trailer work such as freeing stuck tractors, implements and loaded trailers; industrial and workshop lifting where a line must be redirected around an obstruction; and expedition use where pack size and weight matter. The sealed, coated construction performs in mud, sand, snow, rock and water crossings, and holds up in coastal, desert and cold-climate operating conditions .

Fits 7/32 to 3/8 inch Cable and Up to 5/8 inch Synthetic Rope: Compatibility is broad by design. The sheave accepts steel cable from 7/32 inch to 3/8 inch and synthetic rope up to 5/8 inch (16 mm), which covers the winch lines used on most light and medium 4x4 vehicles. The 1.74 inch ring hole takes standard recovery shackles, and the rotatable side plate opens without unthreading the winch line: the rope is laid into the groove and the plate is closed, cutting rigging time on a recovery to well under a minute. Orientation is flexible — use it as a single-line redirect, as a 2:1 doubler, or pair two blocks for a compound pull. No special tools, adapters or vehicle-specific brackets are needed.

Purchasing Guarantee for Wholesale Distributors: We provide stable supply support for wholesale distributors. As an in-house manufacturer, we have sufficient production capacity to supply spot goods and customized orders, with strict full inspection before shipment. Small trial orders are available to reduce your market entry risks. A complete after-sales system supports returns and exchanges for qualified defective products. Regional agency protection policies strictly curb cross-region sales to safeguard your profit. Order lead time is transparent and trackable with multiple logistics options. We offer product documents and sample support, plus dedicated account managers to help you source safely and expand business steadily.

Closed Side Plate and Positive Safety Lock: Safety is engineered into the load path rather than added as a label. The closed side plate with a positive safety lock prevents the block from opening accidentally when the line goes slack or the load shifts — the failure mode that turns a routine pull into a dropped load. The rotatable plate latches mechanically instead of relying on friction, and the smooth sealed sheave keeps the rope inside the groove rather than letting it climb the flange under side load. Working load limit and breaking strength are stamped on the body for pre-use inspection, and each unit is individually load tested before shipment, giving distributors traceable safety data they can pass to end users.

Forged Body, Sealed Sheave, Part-Specific Finish: Forged carbon steel, sealed bearings, a color zinc plated sheave and powder-coated side plates combine to deliver a service life normally associated with units sold at several times the price. Because forging keeps grain flow continuous through the body, the block resists the deformation and stress cracking that shorten the life of cast housings, while the sealed sheave keeps mud and grit out of the bearings — the contamination that causes stiff rotation and mid-season replacement. For trade buyers that durability converts directly into economics: fewer warranty claims, fewer returns, and a product that survives enough recovery seasons to generate repeat orders instead of a single sale.

Rig in Seconds Without Re-Routing the Winch Line: The open-side design removes the most common frustration in recovery rigging: no need to feed a shackled, hook-fitted winch line through the block. The rotatable side plate swings clear, the rope or cable drops into the sheave groove, and the plate locks back into position in seconds. The 1.74 inch ring hole accepts standard recovery shackles, the 7 lbs body is handled and stored by one person, and the compact form fits existing recovery bags and vehicle storage. Crews that rig and de-rig several pulls a day notice the difference immediately, which makes the product straightforward to demonstrate on the sales floor and easy to close.

CE, ISO 9001 and SAE J684 Towing Safety Compliance: Certified for export markets. The product carries CE marking for the European Economic Area and is covered by EU Machinery Directive 2006/42/EC, supported by an SAE certificate for automotive engineering standards that assists North American market entry (certificate reference supplied with commercial documents). It is manufactured in accordance with SAE J684 towing safety requirements, giving dealers a documented compliance position for trailer, hitch and towing accessory ranges, and production is managed under ISO 9001 quality management at a factory that accepts third-party inspection and finished-product testing. Load test records travel with each batch for marketplace, customs and import review.

Factory-Direct Production Power, Flexible Inventory, Defined After-Sales: Factory-direct supply with control over the items that decide a distributor's margin. Production power comes from an in-house forging and finishing line, so capacity scales without outsourcing quality. Craftsmanship follows the same heat treatment, coating and load-test procedure on every batch, which keeps the specification stable across repeat orders. Inventory flexibility supports both regular distributor restocking and large private-label programs without forcing dealers to carry months of stock. Long-standing freight partnerships on the main export lanes keep landed costs predictable, and after-sales cover is defined rather than implied: quality issues are resolved by replacement or credit, and spare units ship quickly so a dealer is never left holding a failed part. OEM and private-label programs are supported with custom logo, packaging and colorways.

Q1. What is your MOQ ?

A:For stock :10 PC , Customization: Minimum order quantity ranges from 10 to 1000 pieces per product. Please consult our sales representatives for specific quantities.

Q2. Does the product meet European and American certification standards?

Our products are certified to European and American standards, including CE, ISO, and DOT certifications. Additionally, we hold dozens of design patent molds, ensuring market protection for your purchases or sales.

Q3.What are your advantages compared with others?

A: 1. With our own factory to manufacture the products, we can ensure timely products delivery

2.Owned factory, the same quality product. the best price

3. We have professional staffs, let you enjoy comfortable and effective communication

4. More efficient management in every process.

Q4.How do you control your quality?

A: 1.Selecting good steel material, producing follow the standard, proper inspection of products

2.100% finished product testing

3.Iso quality management system certificated factory

4.We accept inspection of products.

Q5. Can I order a sample with my own design /logo ?

Yes, our design team can create samples based on your sketches, images, or designs. If you have uncertainties about the product, we can first produce a 3D printed model for your review before proceeding with the formal sample production

Q6: Can I get a free sample ?

A:Because many customers want it, and development cost is too high, we cannot provide free samples, but when you place an order ,the sample cost can be refund to you .

Q7: What is your Sample Lead-Time ?

A: Within 5 working days after confirm all details. If busy season, about 7 working days.

Q8:Can I get a quote for the products I need?

Of course, you can send us an inquiry and provide product dimensions along with detailed images (front, side, back, internal structure, etc.). This will help us provide a more accurate quote. We would be happy to send you a quote.

Q9: What about the delivery day?

Typically 7 to 35 days, depending on the complexity and quantity of the product. You can confirm with us based on your specific prod，We accept 100% T/T payment before delivery, or 30% deposit and 70% before delivery.

Q10:Which kind of shipping way can choose ?

A: By air or by sea. If ship by express (UPS,DHL, FEDEX, EMS ), Shipping time 5-7 days ,except the EMS(EMS is the cheapest way but take more time ). By air : shipping time 12-15 days (the products can't less 22 KG) . By sea (has the different Time-based can choose, within 25 days, 30-35 days , 50-60 days ).some country can shipping by train or truck. you can decide suitable shipping way according to what your need.

Q11:Which kind of shipping way can choose ?

A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDP, DDU

Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, Western Union, Cash, Escrow

Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Arabic, Russian, Korean.