Wholesale Hitch Mounted Hammock Stand 772 lbs Carbon Steel 2 Inch Receiver

Description:

Carbon Steel Muscle With A Powder Coated Skin: This hitch mounted hammock stand is built from 100 percent carbon steel tube and plate, then sealed with a matte powder coating that holds rust, salt air and trail dust out of the frame. Welded arm joints and a solid mounting bar keep the structure rigid under load instead of flexing at the connection points. Seven matte colorways include silver, black, yellow, blue, red, green and orange, all sprayed to a consistent film thickness. Cold mornings, hot parking lots and repeated folding do not change the geometry, and the coating keeps its color instead of chalking or peeling.

772 lbs Of Rated Payload On Any Flat Ground: Every unit is rated for 772 lbs / 350 kg, and the folding arms open to a 96.46 inch / 2450 mm span that accepts gathered end hammocks up to 11 ft / 3.35 m long. The vehicle carries the load, so the hang keeps the same height and tension wherever the vehicle is parked. The frame sits flat and stable on pavement, gravel or dirt, which makes stepping in and out predictable instead of swinging. Rated capacity, span and hammock length are all documented, so buyers know exactly which hammocks the stand will hold.

Hammock Anywhere Your Vehicle Parks: Slide the bar into the receiver and an ordinary parking spot turns into a rest stop. The stand suits pickup trucks, Jeeps, SUVs and RVs, and it works in places where there is no pair of trees: beaches, desert pullouts, lake shores, trailheads, festival fields and tailgate parties. Instead of scouting for trees and level ground, the user drives up, opens the arms and hangs. No stakes, no straps and no anchoring are involved, so paved surfaces perform exactly as well as backcountry ground.

Drops Into Any Standard 2 Inch Receiver: The mounting bar measures 2 inch x 2 inch / 50.8 mm x 50.8 mm, matching the standard square receiver used on Class III and Class IV trailer hitches. Fitting takes a slide and a pin, with no drilling, welding or adapter plates required. The arms fold back for transport and the set travels as one piece in a 71 x 36 x 26 cm carton weighing 20 kg, so it stores in a truck bed, a trunk or behind a seat. One parachute nylon hammock is included, which means the product is complete and hang ready as it arrives.

Wholesale Ready Consistency Order After Order: Frame geometry, coating spec and hardware stay identical from run to run, which keeps listing photos, spec sheets and spare part references accurate across repeat orders. OEM and ODM work covers logo, material, size, color and packaging, with drawing based and sample based customization available. Each unit is packed one piece per box in a reinforced export carton that protects the powder coated finish during handling and stacking. Replacement arms and small hardware are supplied separately, so one damaged part does not turn into a whole unit claim.

Locked In And Load Rated: A carbon steel frame with a 772 lbs / 350 kg rated capacity leaves a wide margin between normal use and the limit. The hitch pin keeps the mounting bar captive inside the receiver, so the stand cannot work its way out while someone is on it. Because there are no tree straps, stakes or guy lines, the support system has fewer parts that can stretch, slip or fail. Stability comes from the vehicle itself, which is the heaviest and most reliable anchor available at a campsite.

More Seasons Per Unit Cost: Powder coated carbon steel resists rust, chipping and sun fade, so the stand keeps its finish through repeated outdoor seasons rather than coming back as a warranty claim. Consistent welding and coating quality reduce returns, which protects margin on every unit sold. Factory direct production removes reseller layers from the cost structure, leaving room for distributor and retail pricing while keeping the material spec unchanged. Replacement arms are available on their own, so a minor issue never writes off the full set.

Set Up In Minutes Without Tools: One person can seat the bar in the receiver, insert the pin and open the arms in minutes, with no tools and no loose assembly steps. The arms fold flat for storage and the unit stays together as one piece, so nothing gets misplaced between trips. Setup does not depend on terrain, trees or anchors, which means the same routine works in a paved lot, at a trailhead or beside a lake. Folding dimensions and carton weight are published, so buyers can plan storage space before ordering.

CE ISO And SAE J684 Documentation: The stand is produced in an ISO certificated quality management system, carries CE marking, and complies with EU Machinery requirements under 2006/42/EC, with compliance documents available for import clearance and retail listings. The towing interface is built to SAE J684, the North American safety standard covering trailer hitches and towing systems, which is the reference US and Canadian buyers verify first. The factory is verified by TUV Rheinland and supported by finished product inspection, so the documentation trail stands up to marketplace approval and buyer audits.

Factory Direct Supply With Stable Capacity: Development, production, customization, inspection and packing sit inside one factory, so material spec and finish do not drift when order volume rises. In house engineering keeps the frame geometry current and repeat orders are matched to the original tooling, which keeps colors and tolerances aligned across seasons. Bulk programs, private label runs and spare part supply all run on the same line that serves export markets in more than 30 countries. Drawing based and sample based customization lets distributors build their own product without changing the core structure.

Q1. What is your MOQ ?

A:For stock :10 PC , Customization: Minimum order quantity ranges from 10 to 1000 pieces per product. Please consult our sales representatives for specific quantities.

Q2. Does the product meet European and American certification standards?

Our products are certified to European and American standards, including CE, ISO, and DOT certifications. Additionally, we hold dozens of design patent molds, ensuring market protection for your purchases or sales.

Q3.What are your advantages compared with others?

A: 1. With our own factory to manufacture the products, we can ensure timely products delivery

2.Owned factory, the same quality product. the best price

3. We have professional staffs, let you enjoy comfortable and effective communication

4. More efficient management in every process.

Q4.How do you control your quality?

A: 1.Selecting good steel material, producing follow the standard, proper inspection of products

2.100% finished product testing

3.Iso quality management system certificated factory

4.We accept inspection of products.

Q5. Can I order a sample with my own design /logo ?

Yes, our design team can create samples based on your sketches, images, or designs. If you have uncertainties about the product, we can first produce a 3D printed model for your review before proceeding with the formal sample production

Q6: Can I get a free sample ?

A:Because many customers want it, and development cost is too high, we cannot provide free samples, but when you place an order ,the sample cost can be refund to you .

Q7: What is your Sample Lead-Time ?

A: Within 5 working days after confirm all details. If busy season, about 7 working days.

Q8:Can I get a quote for the products I need?

Of course, you can send us an inquiry and provide product dimensions along with detailed images (front, side, back, internal structure, etc.). This will help us provide a more accurate quote. We would be happy to send you a quote.

Q9: What about the delivery day?

Typically 7 to 35 days, depending on the complexity and quantity of the product. You can confirm with us based on your specific prod，We accept 100% T/T payment before delivery, or 30% deposit and 70% before delivery.

Q10:Which kind of shipping way can choose ?

A: By air or by sea. If ship by express (UPS,DHL, FEDEX, EMS ), Shipping time 5-7 days ,except the EMS(EMS is the cheapest way but take more time ). By air : shipping time 12-15 days (the products can't less 22 KG) . By sea (has the different Time-based can choose, within 25 days, 30-35 days , 50-60 days ).some country can shipping by train or truck. you can decide suitable shipping way according to what your need.

Q11:Which kind of shipping way can choose ?

A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDP, DDU

Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, Western Union, Cash, Escrow

Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Arabic, Russian, Korean.