Heavy Duty Foldable Steel Tow Pole 50 Ton Off Road Towing Bar for Truck SUV

Description:

High Strength Steel Tubing And Reinforced Clamps: This foldable tow pole is built around high strength steel tubing that carries heavy loads without flexing, and a split folding structure that keeps every section aligned when the bar is in use. Each connection point is fitted with widened clamps that hold their grip and resist deformation under repeated pulling stress. The steel is finished with an anti-rust coating that protects the bar through rain, road salt and long storage between jobs. Joints are reinforced at the points that take the highest load, so the structure keeps its geometry instead of loosening over time. Tubes, clamps and finish are checked before assembly, which is why the pole reaches the buyer in the same condition it left the production line.

Rated From 3 Ton Up To 50 Ton Loads: The pole is offered in a full range of working capacities from 3 ton to 50 ton, so one product line covers light passenger cars as well as heavy commercial trucks. An integrated spring damper sits inside the bar and absorbs the shock that builds when a tow starts or when the towing vehicle brakes. That damping action keeps the load steady instead of letting it snap against the coupling, which is what usually damages towing gear and the vehicles attached to it. High visibility reflective strips run along the bar so the complete towing setup stays visible in low light, at night and in poor weather. Because the pole is rigid rather than elastic, the distance between the two vehicles never changes during the tow.

For Roadside Recovery And Flat Towing: This tow pole handles the work where a vehicle has to be moved under control: breakdown recovery on the highway, shifting a non-running car between yards or workshops, flat towing a passenger car behind an RV or camper, and moving trailers, boats and light equipment around a site. Since the bar holds a fixed distance instead of stretching, steering, braking and reversing stay predictable on uneven ground, gravel, mud and snow. Fleets, workshops, farms, rental yards and roadside assistance teams keep it on hand for calls where a rope or a chain cannot be used safely. It also gives a simple solution for moving vehicles that cannot be started, loaded or steered on their own.

Universal Fit With Tool Free Assembly: The pole assembles and folds by hand. Sections slot together and lock with the supplied clamps and pins, so one person can set it up in minutes without power tools or workshop equipment. When the job is finished, the bar folds down and stores in the carry bag supplied with it, which keeps a van, a truck cab or a workshop corner tidy. Fitment is universal: the bar works with sedans, minivans, SUVs, pickup trucks, vans, light commercial vehicles and heavy trucks, and with the standard hitch balls and towing eyes those vehicles use. Because every capacity shares the same assembly logic, an operator can move between units without retraining.

Stable Supply And Full Order Support: Production runs on our own line, so capacity, specification and finish stay consistent from the first order to the repeat order. Working capacity, bar length, colour, logo and surface finish can all be customized to match a market or a private label program, and your drawings or reference samples can be turned into a production sample before an order is confirmed. Each order is inspected before dispatch and released with the documents required for customs clearance, which keeps receiving and resale straightforward. Replacement parts and technical questions are handled by the same team that manufactures the pole, so the specification you sell is the specification you receive.

Engineered To Keep Every Tow In Control: A rigid tow pole removes the biggest risk in towing, which is uncontrolled movement. Because the bar holds a fixed distance and cannot stretch or spring back, the towed vehicle follows the towing vehicle instead of surging toward it. The built-in spring damper softens the shock of pulling away and of braking, so the load never slams into the coupling. Widened clamps and reinforced joints keep every connection tight through repeated pulls, and the reflective strips make the whole setup visible to other traffic after dark. The driver gets steering and braking behaviour that can be predicted, and predictable behaviour is what keeps a recovery safe.

Built To Work Again And Again: This tow pole is made to stay in service. High strength steel tubing carries the load, the anti-rust coating holds up to weather and repeated handling, and the clamps are sized to keep their grip instead of deforming after a few hard pulls. The folding joints are reinforced where the stress is highest, so the structure holds its geometry through thousands of working cycles. The design is mechanical and simple, with no hydraulic seals, electronics or consumable parts that need servicing, and individual sections can be replaced when they eventually wear. Durable material, protected finish and serviceable construction combine to give the pole a long working life.

Set Up In Minutes Without Extra Tools: One person can put this tow pole into service. Sections align by hand, the clamps and pins lock without power tools, and the bar folds into a compact unit that fits in a vehicle or a storage corner when it is not needed. There are no gauges to adjust and nothing to pressurize, so the same procedure works in a workshop or on the shoulder of a road. Operators who move between different vehicles only have to learn one method. The carry bag keeps the pole, clamps and pins together, which means the next job starts without hunting for lost hardware.

Cleared For Global Market Entry: Compliance documentation is prepared for the markets this tow pole is sold into, including CE marking for the European Union, ISO quality management standards across production, and SAE J684 testing related to towing connections. Orders can be released with the conformity documents, test reports and declarations that market entry and customs clearance require, and product testing is carried out before dispatch. The records behind those claims are held in our own quality system rather than passed through a third party. That paperwork lets a program move into North America, Europe, Australia and the Middle East without a compliance hold-up at the border or at the listing stage.

Factory Backed Supply And After Sales Care: The tow pole comes off our own production line rather than from a trading desk, which keeps specification, finish and tolerances under our control on every run. Stock and production capacity are planned to support continuous supply, so a running program does not stall between batches. Customization is handled in house, covering working capacity, bar length, colour, logo and surface finish, and samples can be produced from drawings or reference units before a program starts. If a unit arrives damaged or a specification question comes up, the same factory team handles the replacement, the inspection record and the technical answer.

Q1. What is your MOQ ?

A:For stock :10 PC , Customization: Minimum order quantity ranges from 10 to 1000 pieces per product. Please consult our sales representatives for specific quantities.

Q2. Does the product meet European and American certification standards?

Our products are certified to European and American standards, including CE, ISO, and DOT certifications. Additionally, we hold dozens of design patent molds, ensuring market protection for your purchases or sales.

Q3.What are your advantages compared with others?

A: 1. With our own factory to manufacture the products, we can ensure timely products delivery

2.Owned factory, the same quality product. the best price

3. We have professional staffs, let you enjoy comfortable and effective communication

4. More efficient management in every process.

Q4.How do you control your quality?

A: 1.Selecting good steel material, producing follow the standard, proper inspection of products

2.100% finished product testing

3.Iso quality management system certificated factory

4.We accept inspection of products.

Q5. Can I order a sample with my own design /logo ?

Yes, our design team can create samples based on your sketches, images, or designs. If you have uncertainties about the product, we can first produce a 3D printed model for your review before proceeding with the formal sample production

Q6: Can I get a free sample ?

A:Because many customers want it, and development cost is too high, we cannot provide free samples, but when you place an order ,the sample cost can be refund to you .

Q7: What is your Sample Lead-Time ?

A: Within 5 working days after confirm all details. If busy season, about 7 working days.

Q8:Can I get a quote for the products I need?

Of course, you can send us an inquiry and provide product dimensions along with detailed images (front, side, back, internal structure, etc.). This will help us provide a more accurate quote. We would be happy to send you a quote.

Q9: What about the delivery day?

Typically 7 to 35 days, depending on the complexity and quantity of the product. You can confirm with us based on your specific prod，We accept 100% T/T payment before delivery, or 30% deposit and 70% before delivery.

Q10:Which kind of shipping way can choose ?

A: By air or by sea. If ship by express (UPS,DHL, FEDEX, EMS ), Shipping time 5-7 days ,except the EMS(EMS is the cheapest way but take more time ). By air : shipping time 12-15 days (the products can't less 22 KG) . By sea (has the different Time-based can choose, within 25 days, 30-35 days , 50-60 days ).some country can shipping by train or truck. you can decide suitable shipping way according to what your need.

Q11:Which kind of shipping way can choose ?

A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDP, DDU

Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, Western Union, Cash, Escrow

Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Arabic, Russian, Korean.