Tire Step for Truck SUV RV Heavy Duty Folding Wheel Step 350 lbs

Description:

Powder Coated Carbon Steel, Welded Not Riveted: The step is built from high strength carbon steel on a fully welded frame, with a reinforced center cross bar running under the deck so the standing surface stays rigid even when your weight shifts to one corner. Steel parts are cleaned and finished with a baked powder coating that resists road salt, mud and long sun exposure, so the frame does not rust through or flake along the seams. The platform is stamped as a single piece with a serrated anti slip pattern instead of a glued grit sheet, which means the grip cannot peel away in wet weather. Thickened silicone pads sit between the hooks and the tire to protect alloy rims and painted sidewalls. Colored warning stripes and reflective detailing make the step easier to spot at the roadside in low light.

350 lbs of Standing Load on a Serrated Deck: This tire step is rated for a maximum standing load of 350 lbs (approx. 158 kg), sized for an operator who leans in with tools rather than stepping up with empty hands. Five depth positions and three height positions let one unit be tuned to the tire in front of you, and the platform stays level once the clevis pin and nut are locked down. The frame fits tires from 8 in to 13 in wide, so a single model spans compact SUVs through one ton pickups instead of requiring a size ladder. Folded flat, it drops to a slim profile that stores under a seat, inside a tool box or in a door pocket, and the whole unit can be carried and positioned by one person.

From Service Bays to Camper Roofs: Anything that sits above a wheel is fair game: reaching the engine bay of a lifted pickup, loading a roof box or a kayak, cleaning a windshield, checking oil on a motorhome, tying down cargo on a trailer deck, or getting to the roof of a commercial van. It also works as a stable platform in a workshop bay where a rolling stool will not fit. Because the step hangs on the tire itself rather than on the body panel, it needs no running board, ladder rack or permanent mount. When the job is finished it folds and goes back inside the vehicle, which makes it practical for roadside repairs, farm and ranch use, and rented or shared vehicles.

Fits 8 in to 13 in Tires, No Tools Required: The step hooks over the tire and is set entirely by hand: choose the depth position on the side rails, choose one of three height positions, then secure it with the supplied clevis pin and nut. It fits tires measuring 8 in to 13 in in width and is built as a universal fit for trucks, SUVs, pickups, vans, RVs, campers, trailers and passenger cars, with no drilling and no bracket kit. The silicone pads and the hook geometry keep metal off the rim, and the center cross bar holds the platform in line even when the tire is wet. Fitting and removal take moments, so one unit can move between vehicles in a fleet.

Batch Consistency, Private Label and Carton Packing: Every batch is produced from the same steel specification and the same coating process, so a repeat order matches the first approved sample in color, weight and platform grip. Custom programs cover laser engraved or printed logos, custom material, custom size, custom colors and retail ready packaging, with drawings or physical samples used as the reference for approval. Units pack in individual cartons of 60 x 45 x 13 cm at roughly 6 kg gross, which keeps pallet and container loading plans predictable for planned shipments. Neutral and branded artwork options are both supported for private label lines, and export documentation, inspection records and design registration files can be issued with the shipment to smooth customs clearance.

Locked Down Before You Step Up: Safety comes from three elements working together: a stamped serrated deck that keeps work boots from sliding even when the surface is wet or oily, a clevis pin and nut that lock the selected depth and height position instead of relying on friction, and a reinforced center cross bar that stops the platform from flexing sideways under an uneven stance. The hooks are shaped to sit deep over the tire with thickened silicone pads, so the step will not chew the rim or walk off the sidewall while it is loaded. Reflective detailing and colored warning bands on the step edge keep the platform visible in a dark garage or on the shoulder at night. A 350 lb standing rating leaves working margin for a loaded operator.

Wear Points Built to Carry Load: Powder coated carbon steel, welded joints and a stamped one piece platform mean the three parts that fail first on a folding step, the hinge, the tread surface and the coating, are all built to industrial duty rather than light consumer duty. There is no glued grit tape to lift off, no riveted plate to work loose and no bare steel edge left to rust through, so the unit does not need replacing the moment the surface gets scuffed. The center cross bar takes the stress instead of the hook plates, so the platform keeps its shape and the lock points stay tight through repeated mounting and storage. Five depth positions and three height positions cover tires from 8 in to 13 in wide, so one model serves a mixed fleet instead of a different step for every vehicle size. The same frame doubles as a stable workshop platform, so one unit covers roadside jobs and bay work instead of two dedicated tools.

One Person, One Minute, No Tools: The step installs by hand the first time and every time after that: hook it over the tire, set the depth and height position, and lock the clevis pin. No drilling, no bracket kit, no running board, no permanent modification to the vehicle. The platform folds flat for storage under a seat or in a tool box, so it can live in the truck and be moved between fleet vehicles on the same shift. Adjustment points are sized for gloved hands. It works on driver or passenger side, front or rear tires, and across trucks, SUVs, RVs, vans, trailers and passenger cars.

CE, ISO and SAE J684 Aligned Manufacturing: This tire step is produced in a factory holding CE certification and an ISO certified quality management system, and the same manufacturing and inspection system carries SAE J684 credentials for towing related hardware, covering the US safety standard buyers ask for on vehicle mounted equipment. EU Machinery Compliance 2006/42/EC documentation is available for this unit. Quality is controlled at three points: incoming steel inspection, in process control during welding and coating, and 100% finished product testing before packing. Certification files, test records and inspection reports can be supplied for customs clearance and marketplace compliance reviews in North America, Europe, Australia and the Middle East.

Factory Direct Supply With Stable Year Round Output: Production sits in our own factory, so raw material, welding, coating and packing stay on one line. That keeps specification, color and finish consistent across repeat batches and keeps the cost structure competitive at volume. Capacity is planned for steady output through peak seasons, so a program can be scheduled without splitting shipments across different steel lots or coating batches. Custom development covers logo, material, size, color and packaging, with drawing based, sample based and full customization options, plus OEM and ODM work handled by the in house design team. Orders are supported with export documentation, quality inspection records and warranty coverage, and multi market distribution programs can be structured around forecast rather than one off purchases.

Q1. What is your MOQ ?

A:For stock :10 PC , Customization: Minimum order quantity ranges from 10 to 1000 pieces per product. Please consult our sales representatives for specific quantities.

Q2. Does the product meet European and American certification standards?

Our products are certified to European and American standards, including CE, ISO, and DOT certifications. Additionally, we hold dozens of design patent molds, ensuring market protection for your purchases or sales.

Q3.What are your advantages compared with others?

A: 1. With our own factory to manufacture the products, we can ensure timely products delivery

2.Owned factory, the same quality product. the best price

3. We have professional staffs, let you enjoy comfortable and effective communication

4. More efficient management in every process.

Q4.How do you control your quality?

A: 1.Selecting good steel material, producing follow the standard, proper inspection of products

2.100% finished product testing

3.Iso quality management system certificated factory

4.We accept inspection of products.

Q5. Can I order a sample with my own design /logo ?

Yes, our design team can create samples based on your sketches, images, or designs. If you have uncertainties about the product, we can first produce a 3D printed model for your review before proceeding with the formal sample production

Q6: Can I get a free sample ?

A:Because many customers want it, and development cost is too high, we cannot provide free samples, but when you place an order ,the sample cost can be refund to you .

Q7: What is your Sample Lead-Time ?

A: Within 5 working days after confirm all details. If busy season, about 7 working days.

Q8:Can I get a quote for the products I need?

Of course, you can send us an inquiry and provide product dimensions along with detailed images (front, side, back, internal structure, etc.). This will help us provide a more accurate quote. We would be happy to send you a quote.

Q9: What about the delivery day?

Typically 7 to 35 days, depending on the complexity and quantity of the product. You can confirm with us based on your specific prod，We accept 100% T/T payment before delivery, or 30% deposit and 70% before delivery.

Q10:Which kind of shipping way can choose ?

A: By air or by sea. If ship by express (UPS,DHL, FEDEX, EMS ), Shipping time 5-7 days ,except the EMS(EMS is the cheapest way but take more time ). By air : shipping time 12-15 days (the products can't less 22 KG) . By sea (has the different Time-based can choose, within 25 days, 30-35 days , 50-60 days ).some country can shipping by train or truck. you can decide suitable shipping way according to what your need.

Q11:Which kind of shipping way can choose ?

A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDP, DDU

Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, Western Union, Cash, Escrow

Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Arabic, Russian, Korean.