Drop Hitch Adjustable Dual Ball Mount 5 inch Drop for 2 inch Receiver

Description:

Heavy Steel With A Coating That Stays Put: This heavy duty adjustable trailer hitch ball mount is built around a high strength carbon steel head and shank instead of a light stamped body. The steel is cut, formed and welded in house, then finished with one protective layers: black powder coat on top that resists chipping from gravel, salt and road spray. The two adjustment pins are stainless steel, so the parts you touch on every trip will not rust into place. The dual ball heads are hardened to keep their shape after thousands of coupling cycles, and each unit is checked for weld quality and pin alignment before it leaves the line.

Rated For 10000 lb Of Pull: This dual ball adjustable ball mount carries a 10000 lb gross trailer weight rating and a 1000 lb tongue weight rating, which covers everything from a loaded utility trailer to a tandem axle equipment hauler. The 5 in drop and 5.5 in rise let you level a lifted truck or a low clearance car without swapping hardware, and the dual ball head rotates to present either a 2 in or a 2 5/16 in ball for the coupler in front of you. Two stainless steel adjustment pins hold the head at the height you set, and the welded shank keeps the load path straight so the mount stays tight in the receiver instead of rocking as the trailer rolls.

Built For Real Tow Duty: Rated For 10000 lb Of Pull:  Consider the jobs an adjustable drop hitch is made for: launching a boat on a steep ramp, pulling a flatbed loaded with a mini excavator, shuffling a livestock or utility trailer around a yard, and hauling a camper through mountain grades on the way to a weekend site. Off road drivers use it as a solid ball point behind a lifted truck, and shops keep one on hand for the mixed trailers that come through during the season. Because the ball height changes with the pins, the same mount works behind a half ton pickup and a heavy duty truck instead of needing a second part number on the shelf.

Drops Into Any Standard 2 in Receiver: Compatibility is deliberately simple: the shank is made for a standard 2 in receiver tube and uses the pin and clip retention most trucks already carry. Installation takes one person and about a minute. Slide the shank in until the holes line up, insert the pin, secure the clip, and lock it if you want the anti theft feature active. Height changes need no tools at all, just pull the two stainless pins, slide the head to the position that levels the trailer, and re pin. When the trailer is parked, rotate the assembly under the vehicle and re pin, so the ball mount sits clear of shins, bumpers and garage doors.

Built To One Spec Every Time: Every run follows the same drawings, welding procedure and coating specification, so each unit leaves the line with the same fit, finish and rating as the ones before it. Incoming steel is checked against the material certificate, and coating thickness on the head and shank is verified before assembly, which is how the finish stays consistent from the first piece to the last. Adjustment pins, clips and ball heads are held to shared tolerances, so a spare part from any batch fits any mount already in service. Dimensional reports and test records are filed under the part number and can be issued with an order, which removes the need to rewrite a spec sheet or a catalogue page between repeat purchases.

Locked In And Stowed Away: Safety begins with retention. Once the ball mount is locked into most receivers, the adjustable arm cannot be pulled out, which removes the easy target that a bare hitch presents and keeps the assembly in place between trips. The head is held by two stainless steel adjustment pins that pass fully through the body, so the mount never relies on friction or a single shear point to carry the load. Ball engagement stays square because the welded shank keeps the load path straight, and the assembly can be rotated under the vehicle when the trailer is unhooked, keeping a hard steel corner out of walking height and out of the path of a closing garage door.

More Miles Between Replacements: Long service life comes from the finish and the hardware rather than from a marketing claim. One coating layers, a black powder coat, protect the steel from the three things that turn a good hitch into a rusted stub: salt, gravel and standing water. Stainless steel adjustment pins will not seize in their holes after a winter of road spray, and hardened ball heads resist the flat spotting and mushrooming that appear on softer balls after heavy use. Head, shank and pins are all serviceable, so a worn pin or ball can be renewed instead of retiring the whole mount.

One Person One Minute Setup: Nothing about this mount needs a second pair of hands. It slides into the receiver and pins in place with the same style of pin and clip the truck already uses, and height adjustment is released by pulling two pins rather than loosening bolts with a wrench. Switching between ball sizes is a rotation of the head instead of a trip to the toolbox, so a driver who reaches the ramp with the wrong ball size can correct it in seconds. The stow position keeps the mount on the vehicle and ready for the next job rather than rattling loose in the bed or the shop.

Documented To International Standards: Strength and endurance testing follows SAE J684, the standard that governs bumper pulled trailer hitches in North America. The line is supplied with CE marking for European and UK distribution and a declaration referencing Machinery Directive 2006/42/EC, so the paperwork a compliance file needs is already in place. Manufacturing runs under ISO 9001 quality management, with inspection records, material certificates and dimensional reports released with bulk orders. Weld procedures and operator qualifications are recorded on site, and each batch keeps a traceable inspection file keyed to the part number. Standards coverage is stated on the order documents rather than left to be checked out after arrival.

Factory Supply Without Surprises: Because one plant handles cutting, welding, coating and assembly, a problem at any step is visible to the next one long before it reaches a pallet. That control is what keeps tolerances stable across repeat orders, so the same part number keeps the same fit and rating every time it is produced. The range extends across the rest of the towing and recovery line, from ball mounts and hitch hardware to shackles and straps, so a catalogue can be built from a single source with finishes and hardware that match. Spare pins, clips and ball heads are available as separate line items for after sales support.

Q1. What is your MOQ ?

A:For stock :10 PC , Customization: Minimum order quantity ranges from 10 to 1000 pieces per product. Please consult our sales representatives for specific quantities.

Q2. Does the product meet European and American certification standards?

Our products are certified to European and American standards, including CE, ISO, and DOT certifications. Additionally, we hold dozens of design patent molds, ensuring market protection for your purchases or sales.

Q3.What are your advantages compared with others?

A: 1. With our own factory to manufacture the products, we can ensure timely products delivery

2.Owned factory, the same quality product. the best price

3. We have professional staffs, let you enjoy comfortable and effective communication

4. More efficient management in every process.

Q4.How do you control your quality?

A: 1.Selecting good steel material, producing follow the standard, proper inspection of products

2.100% finished product testing

3.Iso quality management system certificated factory

4.We accept inspection of products.

Q5. Can I order a sample with my own design /logo ?

Yes, our design team can create samples based on your sketches, images, or designs. If you have uncertainties about the product, we can first produce a 3D printed model for your review before proceeding with the formal sample production

Q6: Can I get a free sample ?

A:Because many customers want it, and development cost is too high, we cannot provide free samples, but when you place an order ,the sample cost can be refund to you .

Q7: What is your Sample Lead-Time ?

A: Within 5 working days after confirm all details. If busy season, about 7 working days.

Q8:Can I get a quote for the products I need?

Of course, you can send us an inquiry and provide product dimensions along with detailed images (front, side, back, internal structure, etc.). This will help us provide a more accurate quote. We would be happy to send you a quote.

Q9: What about the delivery day?

Typically 7 to 35 days, depending on the complexity and quantity of the product. You can confirm with us based on your specific prod，We accept 100% T/T payment before delivery, or 30% deposit and 70% before delivery.

Q10:Which kind of shipping way can choose ?

A: By air or by sea. If ship by express (UPS,DHL, FEDEX, EMS ), Shipping time 5-7 days ,except the EMS(EMS is the cheapest way but take more time ). By air : shipping time 12-15 days (the products can't less 22 KG) . By sea (has the different Time-based can choose, within 25 days, 30-35 days , 50-60 days ).some country can shipping by train or truck. you can decide suitable shipping way according to what your need.

Q11:Which kind of shipping way can choose ?

A: Accepted Delivery Terms: FOB, CFR, CIF, EXW, DDP, DDU

Accepted Payment Currency: USD, EUR, JPY, CAD, AUD, HKD, GBP, CNY, CHF

Accepted Payment Type: T/T,L/C,D/P D/A, MoneyGram, Credit Card, Western Union, Cash, Escrow

Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Arabic, Russian, Korean.